CANOPY INSTALLATION
INSTALLING CANOPY
A canopy is furnished with each firebox and MUST be installed for safe operation. See Figure 15.
WARNING
The firebox canopy must not be modified or replaced with a canopy that may be provided with the unvented decorative room heater.
1.Remove the three (3) screws from the top front frame assembly. Also remove the two (2) screws on the side frames. See Figure 15.
2.Align the canopy with the holes in the top frame.
3.Replace the screws previously removed.
4.Tighten side screws. Make sure the canopy is level and secure.
WARNING
Close fireplace screen panel before operating a decorative type unvented room heater.
Figure 15 - Installing Canopy
26D4721 | 13 |
