Monster Cable MPA5150 owner manual Remote Trigger Connections, Additional Monster Power Amplifiers

Remote Trigger Connections

1.Connect one end of the 1/8"-to-1/8" mono mini cable (included) to the remote output of your receiver/preamplifier.

2.Connect the other end of the 1/8"-to-1/8" mono mini cable (included) to the remote trigger input of the MPA 5150.

3.If your are using more than one Monster Power Amplifier, connect the remote trigger out from the MPA 5150 to the trigger in on additional Monster power amplifiers. Should your receiver or preamplifier not have a remote trigger out, the 12V power transformer can be plugged into the “switched” AC outlet on the back of your receiver or preamplifier.

4.Should you have another component in your system that uses a 12V trigger in, you can connect the remote trigger output of the MPA 5150 to the remote trigger in of this component.

From Receiver/Preamplifier Remote Trigger Out

To

Additional Monster

Power Amplifiers

IN AC/DC 3-30V

REMOTE TURN ON/OFF

OUT DC 12V

FUSE 15A SLOW 120V FUSE 8A SLOW 240V

UNBALANCED

INPUT 4

(RIGHT REAR)

CHANNEL 4 RIGHT REAR

26