SAFETY TIPS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,

OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS

1.Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes ANSI/NFPA 70-1999),

2.including fire-rated construction.

3.Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer.

After making the wire connections, the wires should be spread apart with the grounded conductor and the equipment-grounding con-

4.ductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box.

Before you begin installing the fan, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device,

5.such as a tag, to the service panel.

6.Be cautious! read all instructions and safety information before installing your new fan. Review the accompanying assembly diagrams.

7.When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 7

8.feet from the floor to the trailing edge of the blade.

To reduce the risk of fire, electric shock, or personal injury, mount to outlet box or supporting system acceptable for fan support.

9.Use only the screws provided with the outlet box. (Mounting must support at least 35 lbs.)

Do not bend blade holders during installation to motor, balancing or during cleaning. Do not insert foreign object between rotating

10.blades.

11.Attach the mounting bracket using only the hardware supplied with the outlet box.

WARNING - To reduce the risk of fire or electric shock, this fan should be used with fan speed control part no. UC7067RC-L, manufac-

12.tured by Rhine Electronic Co., Ltd.

The combustion airflow needed for safe operation of fuel-burning equipment may be affected by this unit’s operation. Follow the heat- ing equipment manufacturer’s guideline safety standards such as those published by the National Fire Protection Association (NFPA),

13.and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.

Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such

14.as a tag, to the service panel.

15.WARNING - To reduce the risk of electric shock, this fan must be installed with an isolating wall contorl,switch. WARNING - All set screws must be checked and retightened where necessary before installation.

 

 

Phillips Screwdriver

Wire Cutters

Pliers

 

1

 

 

2

 

 

 

 

 

 

 

 

Before you begin installing the fan, Switch

 

 

Before installing this fan make sure the outlet box is

 

 

 

 

power off at Service panel and lock service dis-

 

 

properly installed to the house structure. To reduce

 

connecting means to prevent power from being

 

 

the risk of fire, electric shock, or personal injury,

 

switched on accidentally. When the service dis-

 

 

mount to outlet box or supporting system acceptable

 

connecting means cannot be locked, securely

 

 

for fan support. (Mounting must support at least 35

 

fasten a prominent warning device, such as a

 

 

lbs.)

 

tag, to the service panel.

 

 

 

 

 

4

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

3Step Ladder

Use metal outlet box suitable for fan support (must support 35 lbs). Before attaching fan to outlet box, ensure the outlet box is securley fastened by at least two points to a structural ceiling member ( a loose box will cause the fan to wabble). Use only the screws provided with the outlet box.

6

Loosen the 2 set screws till you can not feel them on inside of yoke.

Remove keeper from pin and pin from downrod. Place keeper back on pin and save for later.

Thead leadwires and safety cable through downrod. (as shown)

Page 1 Page 3
Page 2
Image 2
Monte Carlo Fan Company 5SLR52 owner manual Phillips Screwdriver Wire Cutters
Page 1 Page 3

5SLR52 specifications

The Monte Carlo Fan Company 5SLR52 is a remarkable ceiling fan that embodies style, functionality, and innovative technology. Designed with both aesthetics and performance in mind, the 5SLR52 is an ideal addition to various interior spaces, providing a perfect balance of form and function.

One of the key features of the 5SLR52 is its sleek, modern design, which seamlessly integrates into a wide range of decors. With a 52-inch blade span, this fan is suitable for medium to large rooms while delivering effective air circulation. The fan is available in a variety of finishes, allowing homeowners to choose the perfect match for their personal style and interior theme. The clean lines and minimalist approach of the 5SLR52 make it a versatile choice that can enhance both contemporary and traditional settings.

In terms of performance, the Monte Carlo Fan Company has equipped the 5SLR52 with a powerful and efficient motor. This brushless DC motor ensures quiet operation, reducing noise pollution while providing reliable airflow. The fan is designed to offer multiple speed settings, allowing users to customize the airflow intensity according to their comfort preferences.

A standout characteristic of the 5SLR52 is its energy efficiency. The fan operates at a lower wattage compared to traditional fans, making it an environmentally friendly choice for homeowners looking to reduce their energy consumption. Additionally, many models come with integrated LED lighting, providing illumination while being energy efficient. The LED lights can be controlled independently, allowing you to adjust the lighting based on your needs.

Another notable technology employed in the 5SLR52 is the reverse function, which allows the fan to operate in both summer and winter modes. In summer, the fan circulates cool air, creating a refreshing breeze, while in winter, the reverse function redistributes warm air trapped near the ceiling. This dual functionality enhances overall climate control in the home, contributing to year-round comfort.

The installation of the 5SLR52 is straightforward, with a range of mounting options, including downrod and close-mount setups. This flexibility makes it suitable for various ceiling heights and types, accommodating a wide range of home designs.

In summary, the Monte Carlo Fan Company 5SLR52 ceiling fan exemplifies modern design, energy efficiency, and innovative technology. With its powerful motor, customizable features, and stylish aesthetics, it stands out as an excellent solution for enhancing comfort in any living space.
Top Page Image Contents