OPERATING INSTRUCTION
PTO OPERATING SAFETY
For the safe operation of the PTO, follow these safe operating procedures.
Three Point Hitch Connecting Implements
1.Connect the implement to the hitch.
See THREE POINT HITCH SYSTEM in this manual.
2.Connect the implement driveline to the tractor.
3.Check the driveline for correct length and for free telescopic movement by lifting and lowering hitch system. The correct length is important to prevent the driveline from hitting bottom or from separating in any tractor implement operating position.
Drawbar Connecting Implements
1.Connect the implement hitch to the drawer with a hardened steel pin. Make sure the pin is securely held in place with a cotter pin or lock pin and does not make contact with the implement driveline.
2.Connect the implement hitch to the tractor drawbar before connecting the implement driveline to the PTO.
3.Connect the implement driveline to the tractor. Check the driveline for correct length and for free telescopic movement. The correct length is important to prevent the driveline from hitting bottom or from separating in any tractor or implement operating position.
PTO driven machinery can cause serious injury. Before working on or near the PTO shaft, or servicing or clearing the driven machine, put the PTO lever in the DISENGAGE position and STOP the engine.
When doing stationary PTO work and dismounting from the tractor with the PTO running, keep clear of all moving parts as they are a potential safety hazard.
IMPORTANT: Follow the implement manufacturers recommendations in adjusting and aligning the implement and implement driveline with the tractor.
52
