FIELD OPERATION
THREE POINT HITCH SYSTEM
The three point hitch system gives position control and draft control (If equipped) of implements. This tractor is equipped with a category I hitch.
The
Implement Identification | Cat I |
Dimensions | Implement |
|
|
A – Gap in top of implement mast | 44.5 mm |
|
|
B – Diameter of holes in top of | 19.1 mm (3/4 inch) |
Implement mast |
|
|
|
C – Diameter of hitch pins | 22.2 mm (7/8 inch) |
|
|
D – Lower Hitch Pin | 682.6 mm |
Inner Shoulder Spread |
|
|
|
57
