|
| SPECIFICATIONS |
|
| |
DIESEL ENGINE | ||
General |
|
|
Type | Three Cylinders, Four Stroke Cycle, | |
| Valve in Cylinder Head, Cross | |
| Flow Porting | |
Firing Order | ||
Bore | 84mm (3.307 inch) | |
Stroke | 90mm (3.543 inch) | |
Piston Displacement | 1496cm3(91.29 Cubic inch) | |
Compression Radio |
| 18.0 to 1 |
Governor Engine Speed without Load | 2670 to 2730 RPM | |
Rated Engine Speed |
| 2500 RPM |
Engine Idle Speed | 1005 to 1055 RPM | |
Maximum Horsepower (Per SAE J816b & J245) | ||
7530 | 30 HP at 2500 RPM | |
7532 | 32 HP at 2500 RPM | |
Valve Clearance (Intake and Exhaust Cold Engine) | ||
| 0.25 mm (0.010 inch) | |
IMPORTANT: Valve clearance adjustment must be made when the engine is not running and is cold.
Engine Lubrication System
Oil Pressure | 296 to 441kPa (43 to 64 PSI) at 2500 |
| Engine RPM with 20 W Oil at |
Fuel System | 93.3 C (200 F) |
| |
Fuel Injection Pump | BOSCH M Plunger In Line |
| NIPPONDENSO ND – PFR |
Injection Pump Timing |
|
| 11Degrees Before Top Dead Center (BTDC) |
Fuel Injectors | Hole Type, NIPPONDENSO, ND – DLLA150P |
14
