SAFETY/DECALS
STEP 1
ROPS BAR
(NORMAL ( OPERATING POSITION
POSITION
PIN
SLIT
STEP 4
HOLE
SLIT
While holding the ROPS bar. CAREFULLY pull the position pins.
STEP 2
POSITION PIN
And then Rotate position pin to (90 ).
STEP 3
ROPS BAR
CAREFULLY move the ROPS bar to the desired position.
Rotate position pin and insert GUIDE to SLIT. In this state, move ROPS bar up and down and position pin is installed completely ROPS bar can set at three position.
STEP 5
ROPS BAR
UPRIGHT | ( |
(POSITION |
|
POSITION PIN
Adjustment of Foldable ROPS.
If you feel less friction when the ROPS is in the upright position, tighten the nut untill you feel the right friction in the movement.
Rollover protection is provided only with proper assembly. Lock pins, must be in place. Correct parts may be obtained from your dealer.
13
