INSTRUMENTS/CONTROLS
OPERATING CONTROLS
Control Switches
2
4
3
1
5
1. STARTER KEY SWITCH
The starter key switch can be removed with the switch in the OFF position. Four position switch as follows:
position |
|
| Engine and all lamps except |
| |||
(OFF) | the turn signal and flasher lamps | ||
| are turned off. | ||
Position |
|
| First position clockwise from |
|
| ||
(HEAT) | OFF. In this position (Engine not | ||
&running) energizes the glow plugs.
(ON) The charge indicator, glow plug indicator and oil pressure indicator will illuminate.
The fuel gauge and temperature gauge will show correct values.
position |
| Turn the key fully clockwise against the force of the |
| ||
(START) | spring in the switch. The starter motor will turn the engine. | |
|
| Release the key immediately when engine starts. |
NOTE: To prevent operation by persons not authorized and the possible discharge of the battery, remove the starter key when you leave the tractor.
IMPORTANT: Do not keep the starter key switch in the ON position for a long period of time when the engine is not operating.
22
