OPERATING INSTRUCTION
POWER TAKEOFF (PTO)
Mid PTO (OPTION)
The Mid PTO has a 25.4 mm (1 inch) diameter 15 spline output shaft.
ENGAGE THE MID PTO AS
FOLLOWS:
1.Push the clutch pedal fully.
2.Move the Mid PTO control lever to the ON position.
3.Release the clutch pedal slowly.
DISENGAGE THE MID PTO
AS FOLLOWS:
1.Push the clutch pedal fully.
2.Move the Mid PTO control lever to the OFF (Engine Start) position.
NOTE: Keep the Mid PTO
control lever in the OFF (Engine Start) slot when starting the engine and when the PTO is not being used.
3. Release the clutch pedal.
CLUTCH PEDAL
MID PTO LEVER
The following table shows the required engine speed to get the required Mid PTO output shaft speed.
Mid PTO Output
Shaft Speed
Required
Engine Speed
2000 RPM
2526 RPM
50