SAFETY/DECALS

3.Cover the PTO shaft with a guard when not using.

4.Be sure to engage the brake and lower any attachment or implement before disassembling any part.

5.Never adjust or service the tractor when it is in motion or while the engine is running. Always adjust the brake or clutch properly in accordance with the adjusting procedure in the instruction book.

6.Do not remove the radiator cap while the engine is running. Shut down the engine and wait until it cools sufficiently. For removal, turn the cap to the first stop to relieve pressure.

To replace the coolant, use the coolant recovery tank.

7.Hydraulic oil or fuel escaping under pressure can penetrate the skin, causing serious injury. Before disconnecting oil or fuel lines, be sure to relieve all pressure. Before restoring pressure after repair, be sure all connections are tight and all hydraulic components are in normal condition. If injured by leaked fluid, see a doctor immediately for proper treatment.

8.When refueling, be particularly careful first to stop the engine completely to prevent the fuel from igniting. Never refuel in the presence of an open flame or while smoking.

2

Page 10
Image 10
Cub Cadet 7530, 7532 manual Cover the PTO shaft with a guard when not using