Cub Cadet 7530, 7532 manual Fuel Filter Element Replacement, Step

LUBRICATION/FILTERS/FRUIDS

Fuel Filter Element Replacement

To replace the filter element, use following procedure:

STEP 1

FUEL SHUT-OFF VALVE

CLOSE

STEP 4

FILTER ELEMENT

Close the fuel shut-off valve.

STEP 2

Clean the outside of the filter body and cup to prevent dirt or foreign materials from entering the system.

STEP 3

RETAINING NUT

Loosen the filter cup-retaining nut. Remove filter cup. Remove old filter element and clean inside of filter cup.

Install new filter element. Assemble filter cup and retaining nut to filter body.

NOTE: Be sure O-ring is in place on the filter body and filter cup.

STEP 5

OPEN

Open the fuel shut-off valve and vent the fuel system. See Fuel System Air removal in this manual.

STEP 6

Clean fuel off the engine. Start the engine to check for fuel leaks around the filter, lines and fittings.

NOTE: If the engine does not have power with a full load after you have done the filter service and removed the air from the system, see your Dealer to find and correct the cause.

92