OPERATING INSTRUCTION
COLD TEMPERATURE OPERATION
To start and operate your tractor during cold ambient temperatures, use these procedures:
1.BATTERY – Must have a full charge.
2.FUEL – Must be clean and with no water. See Fuel Specifications in this manual.
3.ENGINE OIL – Must have the correct viscosity for the ambient temperature range.
4.TRANSMISSION HYDRAULIC FLUID – Use Cub Cadet Hydraulic Transmission fluid.
5.COOLING SYSTEM – Must have ethylene glycol solution for protection.
6.TIRES – If there is liquid in the tires, the tires must have protection against temperatures below 0 C(32 F). See your Dealer.
7.STOPPING THE ENGINE – Run the engine at idle speed for a short period of time to permit the engine temperature to decrease before stopping.
8.CONDENSATION IN FUEL TANK – To prevent condensation in the fuel tank and water entering the fuel system, fill the fuel tank after each operating day.
9.FUEL FILTER CUP – During cold ambient temperatures, make sure you remove water from the fuel filter cup each day.
NOTE: Do not use ether as a cold temperature starting aid.
43
