STEP 7
CLUTCH PEDAL
Push the clutch pedal down.
OPERATING INSTRUCTION
STEP 8
START
Turn key switch to start position until engine starts, but no more than 10 seconds, then release the key.
Run engine for two minutes at 1500 RPM.
STEP 9
When the engine starts, check the oil pressure indicators stay on, stop the engine and find out what is wrong.
NOTE: If the oil pressure indicator stays on after the engine starts, stop the engine and check the oil level in the crankcase. Add oil if necessary. Start the engine, if the indicator is still on, do not operate the engine. Operating the engine without oil pressure will damage engine bearings and other engine parts. See your dealer.
IMPORTANT:
1.If the engine starts and then stops, wait for the starting motor to stop turning before you turn the key switch to START position again.
2.Do not use the starter motor for more than 10 seconds without stopping. Wait one minute between starts so the starter motor can cool.
3.If engine stops when operating with a load, immediately start the engine again to prevent overheating caused by stopping the flow of oil for cooling and lubrication.
40
