OPERATING INSTRUCTION
STEP 3 | STEP 5 |
OFF
POSITION
ENGINE
SPEED
CONTROL
LEVER
Put the REAR PTO and MID PTO c o n t r o l l e v e r s i n t h e O F F (Engine start) position.
STEP 4
Put the SHUTTLE lever in the N (Engine start) slot (Gear Drive).
HST control pedal in the N position CLUTCH pedal (HST Drive)
Put the engine speed control lever at the middle position.
STEP 6
Turn the starter key switch to the heat & ON position.
Wait until the glow plug indicator lamp is put out.
(Approximately 1 to 3 seconds.)
39
