OPERATING INSTRUCTION

IMPORTANT: During cold ambient temperatures, never run the engine at low idle speed for long periods of time.

During cold ambient temperatures, if the engine will not heat to or keep the rated operating temperatures can cause damage to the engine can occur. Use the following procedures to warm the engine and transmission fluids, and to keep the correct operating temperatures.

1.WARMING THE ENGINE AND TRANSMISSION.

A. To heat the transmission fluid to operating temperature, run the engine at 1500 RPM for approximately five minutes.

IMPORTANT: Operating the tractor with cold transmission fluid can cause rough tractor operation with possible injury to the operator.

2.KEEP ENGINE AT CORRECT OPERATING TEMPERATURE.

A.Never run the engine below 1500 RPM.

B. Put a cover in front of the grille to control the amount of air going through the radiator.

3.STOPPING THE ENGINE

A.Run the engine at slow speed for a short period of time. This will permit the engine temperature to decrease gradually before stopping the engine.

44

Page 52
Image 52
Cub Cadet 7530 Warming the Engine and Transmission, Keep Engine AT Correct Operating Temperature, Stopping the Engine