LUBRICATION/FILTERS/FRUIDS
Front Axle Oil Change
1.To change the front axle oil, put the tractor on level ground. Put the range lever in L, engage the park brake and stop the engine.
DIFFERENTIAL DRAIN PLUG
FILL HOLE
2.Remove the fill cap located on the axle housing, the differential drain plug located in the bottom of the housing and the gear case drain plugs located on the bottom of both side gear cases to drain the oil.
NOTE: For best results, drain the oil when the oil is warm.
DRAIN PLUG
3.Install the differential and both gear cases drain plugs. Remove the oil level plugs located on both gear cases. Remove both Air Vent Plug located on both GearCases. Supply oil through the Fill Hole.
Supply multipurpose
Until the oil flows out of the Level Plug Hole. Add the recommended oil through the fill hole until the oil begins to flow out the level plugholes. Install the oil level plugs and the fill cap.
103
