INSTRUMENTS/CONTROLS
2. ENGINE COOLANT TEMPERATURE GAUGE
The gauge indicates the coolant temperature when the starter key switch is in ON position.
If the engine overheats, the pointer moves right into H position area. In this case, run the engine at 1500 RPM without load until the pointer moves left out from H position area. If the pointer still stays in the H position area, stop the engine immediately and check for the cause.
3. FUEL GAUGE |
| The meter shows how much fuel is in the tank. |
|
NOTE: The pointer can be in any position when the starter key switch is in the OFF position.
4. TURN SIGNAL INDICATORS
The LH indicator on the TACHOMETER will operate when the turn signal switch is turned to the left. The RH indicator will operate when the switch is turned to the right. Both indicators will operate ON and OFF when Hazard switch is pushed down.
20
