47060 rev2 25/6/07 12:37 Page 10
Set the automatic timer function
NOTE: The timer function can be set when the coffee maker is brewing or when it is in standby.
1Press the programme button ô. The display will change to show the previous set time and cup selection flashing. If no previous setting has been made or the machine has been unplugged from the socket since the last setting the default setting will be shown; 12:00 and full carafe.
2Select ø the desired number of cups that want to be brewed, 1/2 or full carafe (see cup selection function on page 11). The cup selector indicator will stop flashing.
3 Press the hour and minute ÷ buttons to set the desired time. The start time will stop flashing.
NOTE: The programming mode indicator continues to flash to show the display is still in programming mode.
4If the programme button ô is pressed again or if no buttons are pressed within 5 seconds the cup selection setting and the start time are memorised.
5To activate the automatic timer function press AUTO button õ.
•The display will change to show the programmed time and cup selection setting for 5 seconds. The display will then change to show the time, the automatic timer function indicator will illuminate to show the automatic timer function is set.
•With the automatic function activated the coffee maker will turn on at the desired time and start to brew the coffee.
NOTE: If the AUTO button õ is pressed during the brewing process the machine will switch off and the automatic timer function will be activated.
If setting the automatic timer function during the brewing process, wait until the process is complete before pressing the AUTO button.
6Press the AUTO button õ again to cancel the automatic function, the timer function indicator will disappear. The machine will keep in the memory the cup selection setting and the start time until it is unplugged from the mains socket.
7To change the start time and the number of cups repeat steps
WARNING: Remember to fill the water tank with water and the filter with coffee before activating the auto function.
NOTE: The clock is a 24 hour clock.
If no buttons are pressed, the display will revert to the time display within 5 seconds.
9
