Morphy Richards 47060 DIGITAL INTERFACE VERSIONS ã Set the clock, G H I J, K L M, Making coffee

Models: 47061 47063 47062 47060

1 16
Download 16 pages 43.49 Kb
Page 8
Image 8
DIGITAL INTERFACE VERSIONS ã

47060 rev2 25/6/07 12:37 Page 8

DIGITAL INTERFACE VERSIONS ã

Set the clock

When the machine is plugged in, the display will flash 12:00 dimly.

To set the time press the hour button ö and minute buttons ÷ to reach the desired time.

NOTE: The clock is a 24 hour clock.

The clock will be reset, each time the product is unplugged at the wall.

Making coffee

1Press the push button Þ to open the hinged lid. The lid will automatically rise G.

2Using the jug, fill the water reservoir Û with the required amount of water using the level indicator æ as a guide. Both the jug and water level indicator are marked in cups H.

3Spoon Ü the required amount of ground filter coffee into the mesh filter Ý spreading evenly. We suggest one level measuring spoon for every cup. Ensure the filter is sitting properly in the filter holder I.

4Close the lid. Ensure the lid is closed and latched properly,J otherwise the machine will not function correctly.

5Slide the jug à/á into the coffee maker ensuring it sits correctly on the hot plate K. The jug lid must be in place during the brewing process; otherwise the non drip valve will not open, causing the filter to flood.

Thermal Carafe Variant

Note: Thermal carafe versions have no hot plate. Please ensure the jug sits correctly on the base recess.

Ensure the jug á lid is fully closed by turning the lid clockwise, this ensures the maximum temperature is maintained in the jug. To ensure the coffee is kept as warm as possible we advise you rinse your thermal carafe in hot water before use.

Please note the jug lid must be in place during the brewing process; otherwise the non-drip valve will not open, causing the filter to flood.

6Select the required strength of coffee using the strength selector on the lid L.

7Press the power ON/OFF selection button ó. The display lights up brightly and the cup selection indicator will flash 35 showing the previous selection.

NOTE: If the machine has been unplugged from the wall socket since the last operation the previous selection will be cleared, the default setting will be applied (1 full carafe).

8Press the cup selection button ø to select one of the available options, 1/2 carafe or full carafe M depending on the number of cups required. Refer to ‘Cup selection function’ page 11 for further information. The selection indicator will stop flashing, if no buttons are pressed for 2 seconds the machine will begin the brewing process.

9The brewing indicator ù will start to illuminate from left to right indicating that brewing is in progress, hot water will start to flow through the coffee grounds and into the jug as coffee á.

G

H

I

J

K

L

M

7

Page 8
Image 8
Morphy Richards 47060, 47062, 47063, 47061 manual DIGITAL INTERFACE VERSIONS ã Set the clock, G H I J, K L M, Making coffee