Slicing and shredding blades
1Place the blade of your choice on the blade holder Í, inserting the longer tab on the side on the blade first.
2Press the other end of the blade until it ‘clicks’ into place.
3Fit the processor bowl and spindle as detailed previously.
4Using the finger holes in the blade holder, fit it over the spindle and press firmly into place as indicated.
WARNING: USE EXTREME CAUTION - BLADES ARE SHARP.
5Fit the lid and click into place as detailed in the ‘Setting up’ section.
6Plug in the processor.
7Use the food pusher Á to add food into the processor bowl through the feeder tube.
Chipping blade Ô
1Fit the processor bowl and spindle as detailed previously.
2Using the finger holes in the chipping blade, fit it over the spindle and press firmly into place as indicated.
WARNING: USE EXTREME CAUTION - BLADES ARE SHARP.
3Fit the lid and click into place as detailed in the ‘Setting up’ section.
4Plug in the processor.
5Use the food pusher Á to add food into the processor bowl through the feeder tube.
Citrus juicer
1Fit the processor bowl as detailed previously.
2Fit the citrus press bowl Ù into the processor bowl.
3Rotate
4Insert the citrus cone ı into the centre of the citrus press bowl, with its shaft inside the central column of the bowl.
5Plug in processor
6Place fruit on citrus cone and hold with a cupped hand.
7Turn speed control to MIN.
WARNING: ALWAYS OPERATE THE JUICER AT MINIMUM SPEED ONLY.
7
