Morphy Richards 760 manual Blender ·, Hints and tips, Cleaning the processor and attachments

Blender ·

1Remove the processor bowl and lid.

2Remove the safety cover ¤. This can only be done once the processor lid has been removed.

3Place the blender · into its location on the processor body, with handle to the left. Turn anti-clockwise until blender clicks in place and the arrows are aligned.

4Place food in blender.

5Place the lid ‚ and goblet „ on the blender.

6Replace the processor bowl and processor lid. Ensure that the lid tab has clicked into place. The blender will not operate if the processor lid is not ‘clicked’ in place.

7Plug in the processor.

8Always operate the blender with the lid in place.

9When blending hot liquids, remove the goblet „.

10Never operate the blender with more than 1500ml of liquid or when empty.

TO REMOVE BLENDER,

YOU MUST FIRST UNLOCK AND REMOVE THE PROCESSOR LID.

FOR SAFETY, DO NOT FIT ANY ATTACHMENTS INTO THE FOOD PROCESSOR BOWL WHEN USING THE BLENDER.

Cleaning the processor and attachments

1Switch the processor off and unplug from the electrical socket.

2All accessories and processor tools can be washed in hot soapy water except for the processor body ⁄ and the whisk arm

Ú. WARNING:

EXTREME CARE MUST BE TAKEN WHEN WASHING THE METAL BLADES AS THESE ITEMS ARE EXTREMELY SHARP.

3The stainless steel blades and citrus press are the only dishwasher-safe items.

4Clean the processor body and whisk arm by wiping with a damp cloth. ALWAYS UNPLUG THE PROCESSOR BODY BEFORE CLEANING.

5To clean the blender · fill with warm water and washing up liquid, run for 30 seconds on maximum speed and repeat as necessary.

Hints and tips

•The metal blade  can be used for chopping meat, fish vegetables, cheese etc, setting the speed to maximum.

•For finer chopping, increase the length of time you process.

•For coarser chopping, use the pulse button for a few seconds and monitor food texture.

•Pre-cut larger pieces to make them fit into the feed tube. When chopping hard foods (eg meat, cheese) cut into 1 inch/2.5cm cubes.

•For shredding and chipping, place food horizontally into the feed tube, for slicing place the food vertically.

•When blending, pour the liquids in first and then add the solid food. Begin blending at the lower speed and increase when needed.

•When slicing carrots, place 2 at a time in the feeder tube to keep upright.

8