Morphy Richards GrimeBuster steam cleaner manual Setting up your steam cleaner, Filling the boiler

70515+70516 Rev 1 19/5/04 3:59 PM Page 4

Setting up your steam cleaner

Filling the boiler

1Unscrew the filler cap ⁄ anti-clockwise.

2 Fill the boiler with a maximum of 1.8 litres of water by using the funnel Ï provided. A

3 Do not use any detergents.

4 Screw the filler cap ⁄ clockwise until finger tight. Do not overtighten.

Attaching hose and accessories

1Pull down the flap on the front of machine socket. B

2Insert the plug on the end of the hose ‰ into the machine socket › with the button side facing up, and push firmly until it clicks into place. B

3Attach the desired accessory, ie. large floor brush Ì, triangular nozzle Û, these need to be attached to the brush connector Ó before attaching it to the extension tube or handle. Jet nozzle Ô, window squeegee Ú to the extension tube Ë or directly to the handle Â, depending on the application. The

accessories vary per machine.

4The round brush(es)  and Ò can be attached to the jet nozzle.

5Join the extension tubes together, slide one tube into the other until it locks into place C.

6Attach the tubes to the handle of the hose. Slide the handle into the extension tube until it locks into place D.

•Some tasks may be easier with only one tube fitted or none at all.

7To connect the desired accessory directly to the steam handle, slide the

handle into the accessory head until it locks into place.

8When using the large floor brush or the triangular brush, the brush connector needs to be fitted to the brush first, in order to attach the same to the extension tube.

A

B

C

D

4