70515+70516 Rev 1 19/5/04 3:59 PM Page 7
1The jet nozzle can be attached either
directly to the handle or via the extension tubes.
•The closer you hold the jet nozzle to the object to be cleaned, the better the cleaning results will be.
•The round bristle brushes can be snapped onto the end of the jet nozzle.
•The nylon brush is suitable for most cleaning applications such as, grout, tapware, toilets, bathrooms, fridge seals and sliding door runners.
•The metallic brush is suitable for more stubborn dirt where a more abrasive action will not affect the surface, such as BBQ plates and lime scale in toilets.
Sanitising and removing dust mites, allergies from bedding and upholstery
Fit the triangular nozzle with cotton cloth fitted and pass the steam slowly and evenly over the surface ensuring all areas are treated. Repeat the process. Leave the mattresses to dry thoroughly before covering.
Triangular brush Û Recommended applications include:
-bedding for removal of dustmites and their allegens. Allow mattresses to dry naturally.
-smaller washable areas, such as: kitchen and bathroom surfaces
-car interiors
-upholstery
Integrated window cleaner Ú
1Fit the window cleaner to the handle
(attach extension tubes if required).
2To ‘steam clean’ the surface, place the thick rubber of the accessory head against the glass, whilst releasing the steam. Keep the steam control switch Ê pressed until the entire surface is covered with steam.
3To remove excess water turn the accessory head around with the squeegee against the surface. Move the squeegee in straight passes from top to bottom. Wipe the rubber blade and the bottom edge of the window dry after each pass.
Professional iron ˜(certain models only)* The high steam professional iron
produces up to 6 times more steam than a normal domestic iron and is up to 4 times faster.
Note: Do not stand the iron on its end, always place it with the soleplate down on the iron pad ¯ supplied.
1Firmly insert the plug of the iron into the
machine socket of the cleaner until it locks in place.
2The temperature setting on the iron needs to be set to the correct setting for
the fabric concerned.
3Press the steam on/off button ‹ on the machine. Both orange lights will come on. The light on the iron will turn off when it has reached the desired
temperature.
4When the steam is ready for use and the iron is hot, place your thumb on the large switch located at the top of the iron, to release steam.
5Release some steam away from the
fabric before commencing ironing until a steady flow of steam comes out.
6The iron can be used vertically to
7
