73352 rev2 22/6/06 11:09 Page 7
HINTS AND TIPS
Safety
(Suction motor)
If the cleaner overheats a motor protection thermostat will automatically switch the motor off. If this happens, switch the cleaner off, unplug from the power supply and leave the cleaner to cool for at least 60 minutes. Check the airways for blockages, empty dust canister and clean the filters before restarting.
Safety cut out
(beater bar motor)
If a large item or rug edge etc jams the beater bar a safety
CLEANING AND MAINTENANCE
Unplug from the mains before cleaning. The vacuum cleaner, especially the dust compartment and all accessories can be cleaned using a damp cloth or a non- abrasive cleaner and wiped dry.
Blockages
Purchasing replacement filters
Use only original Morphy Richards filters. These can be purchased from Morphy Richards on Replacement parts line.
Helpline
If you have any difficulty with your appliance, do not hesitate to call us.
We are more likely to be able to help than the store from where you bought it.
Please have the following information ready to enable our staff to deal with your query quickly.
•Name of the product
•Model number as shown on the underside of the appliance.
•Serial number as shown on underside of the appliance.
UK Helpline | 0870 060 2604 |
|
Replacement Parts | 0870 167 6635 |
|
Ireland Helpline | 1800 409119 |
|
N
Î
O
If the performance has deteriorated there may be a blockage. Check the hose tube and nozzles. The dust canister connector may be removed for access to the air path by pressing the button (top and bottom) N. When
The floor nozzle tube may also be disconnected at the upper end to clear any blockages.
Rotate the bayonet connector and pull down to disconnect O.
For electrical products sold within the European Community. At the end of the electrical products useful life it should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice in your country.
7 | www.morphyrichards.com |
| 7 |
