Morphy Richards PerformAir Upright Vacuum manual Cleaning the dust, canister filter

73352 rev2 22/6/06 11:09 Page 6

3 Fit the new replacement allergy filter.

4 Refit the grille.

J

Dispose of the used allergy filter in the dust bin.

	Cleaning the dust
	canister filter		K
1	Operate the filter cleaning
	clicker lever fl several times
	and empty the canister over a
	bin and then close the canister.
2	To access the filter assembly
	rotate the dust canister lid ˜
	anti clockwise and remove from
	the dust canister J.
3	Turn the central mesh filter ı
	clockwise to remove and clean
	as required K.	L
4	Detach the pleated circular filter
	Ù from the canister lid ˜ by a
	firm pull action L.
5	Both the mesh and pleated
	filters may be washed (in warm	Ù	˜
	water only) but must be
	thoroughly air-dried before re-
	fitting.

The spare pleated filter allows one filter to be washed and dried whilst the other is in use.

6Re-locate the pleated filter back into position on the canister lid

by aligning the tabs on the dust canister lid ˜ (marked by arrows) L with cut away sections on the top of the pleated filter before pushing into place.

Refit the mesh filter and turn anti-clockwise to lock into position on the dust canister lid.

Re-attach the canister lid on to the canister by aligning the

arrows on the canister lid and the canister J. Then rotating the canister lid clockwise.

6 UK Helpline 0870 060 2604 Replacement Parts 0870 167 6635 Ireland Helpline 1800 409119 6