
76
Maintenance
Cleaning
Cleaning
When you clean the printer, use one of the following supplies that best suits your needs:
Cleaning Supplies | Order | Intended Purpose | |
Quantity | |||
|
| ||
|
|
| |
Cleaning pens | Set of 12 | Clean printhead | |
|
|
| |
Cleaning swabs | Set of 25 | Clean media path, guides and sensors | |
|
|
|
You can obtain cleaning supplies at www.zipzebra.com.
The cleaning process takes just a couple of minutes using the steps outlined below.
Printer Part | Method | Interval |
|
|
|
Printhead | Let the printhead to cool for a minute, then use a | After every roll of |
| new cleaning pen to swab the dark line on the | media. |
| printhead cleaning from the center to the outside |
|
| edges of the printhead. |
|
| See Cleaning the Printhead on page 77 |
|
|
|
|
Platen roller | Remove the platen roller to clean. Clean the | As needed. |
| roller thoroughly with 90% |
|
| alcohol and a cleaning swab or |
|
| See Platen Cleaning and Replacement |
|
| on page 80 |
|
|
|
|
Peel bar | Clean it thoroughly with 90% |
|
| alcohol and a |
|
Media path |
| |
Let alcohol dissipate and the printer dry |
| |
|
| |
| completely. |
|
|
|
|
Exterior |
| |
|
|
|
Interior | Gently brush out printer. |
|
|
|
|
Caution • Adhesives and media material can over time transfer onto the printer components along the media path including the platen and printhead. This
Important • Using too much alcohol can result in contamination of the electronic components requiring a much longer drying time before the printer will function properly.
| GX420d™ / GX430d™ User Guide | 8/4/10 |