ZPL Configuration Status to Command
The configuration settings listed here resume after the TAKE LABEL sensor value. These listings contain printer features seldom changed from default or provide status information (e.g. Firmware Version).
113
Table 3 • ZPL Commands and Configuration Receipt Callout
Command | Listing Name | Description | |
|
|
| |
^MP | MODES ENABLED | Default: CWF (See ^MP Command) | |
|
| (CWFM for wireless printers with display) | |
| MODES DISABLED | Default: (nothing set) | |
|
|
| |
^JM | RESOLUTION | Default: 832 8/mm FULL (203 dpi) | |
|
| 1280 8/mm FULL (300 dpi) | |
— | FIRMWARE | Lists ZPL Firmware Version | |
— | XML SCHEMA | 1.3 | |
— | HARDWARE ID | Lists Firmware | |
— | CONFIGURATION | CUSTOMIZED (after first use) | |
— | RAM | 2104k........ R: | |
— | OPTION MEMORY | 65536k.......B: (only displays this if installed) | |
— | ONBOARD FLASH | 1536k.........E: | |
^MU | FORMAT CONVERT | NONE | |
^JI / ~JI | ZBI | DISABLED (Requires key to enable) | |
— | ZBI VERSION | 2.1 | |
^JH | LAST CLEANED | X,XXX IN | |
^MA |
|
| |
HEAD USAGE | X,XXX IN | ||
~RO |
|
| |
TOTAL USAGE | X,XXX IN | ||
| |||
|
|
| |
| RESET CNTR1 | X,XXX IN | |
|
|
| |
| RESET CNTR1 | X,XXX IN | |
|
|
| |
— | SERIAL NUMBER | XXXXXXXXXXX | |
^JH | EARLY WARNING | MAINT. OFF |
The printer has the ability to set a command or a group of commands once for all receipts (or labels) that follow. Those settings will remain in effect until they are changed by subsequent commands, the printer is reset, or you restore factory defaults.
8/4/10 | GX420d™ / GX430d™ User Guide |
