115

Printer Memory Management and Related Status Reports

Table 4 • Object Management and Status Report Commands

Command	Name	Description

^WD	Print Directory Label	Prints a list of objects and resident bar codes and
		fonts in all addressable memory locations
~WC	Print Configuration	Prints a configuration Status Receipt (Label)
	Label	Same as Feed Button mode one flash routine
^ID	Object Delete	Deletes objects from printer memory
^TO	Transfer Object	Used to copy an object or group of objects from
		one memory area to another.
^CM	Change Memory Letter	Reassigns a letter designation to a printer
	Designation	memory area.
^JB	Initialize Flash memory	Similar to formatting a disk - erases all objects
		from the specified memory locations B: or E: .
~JB	Reset Optional Memory	Similar to formatting a disk - erases all objects
		from the B: memory (factory option).
~DY	Download Objects	Downloads and installs wide variety of printer
		usable programming objects: fonts (OpenType
		and TrueType), graphics, and other object data
		types.
		Recommendation: Use ZebraNet™ Bridge for
		downloading graphics and fonts in the printer.

~DG	Download Graphic	Downloads an ASCII Hex representation of a
		graphic image. This is used by ZebraDesigner™
		(label creation application) for graphics.

^FL	Font Linking	Appends secondary TrueType font or fonts to the
		primary TrueType font to add glyphs
		(characters).

^LF	List Font Links	Prints a list of the linked fonts
^CW	Font Identifier	Assigns a single alphanumeric character as an
		alias to a font stored in memory.

8/4/10

GX420d™ / GX430d™ User Guide

980611-001 Rev. C