Motorola RFS6000, 1725-36197-001

Configuration Guide

PN: 1725-36197-001_A.doc

8. To configure security, in the Encryption section select the

WPA/WPA2-TKIP check box.

9. Click the Config button. The dialog box shown below will appear.

10. In the Key Settings section, enter 12345678 under ASCII Passphrase.

11. Click OK.

Contents

Main Trademark Information Patent Information Copyright Notice Notice Contact Information Introduction Certified Product Summary Service Information Network Topology Configuration Settings Installing a New Image Installing firmware through the CLI Installing firmware through the Web interface Page Installing the AP license through the CLI Installing the AP license through the Web interface Configuring the Wireless Switch from the Default Configuration Radio Settings Configuring radio settings through the CLI When SpectraLink Wireless Telephones are configured for 802.11b & b/g mixed mode: When SpectraLink Wireless Telephones are configured for 802.11g only mode: When SpectraLink Wireless Telephones are configured for 802.11a mode: Channel selection For 802.11b/g radio: For 802.11a radio: Configuring radio settings through the Web interface Page Page Page SSID, QoS and Security Settings Configuring SSID, QoS and security settings through the CLI To configure WPA2-PSK replace the last two lines in the above command sequence with the following: Configuring SSID, QoS and security settings through the Web interface