Motorola 6880906Z72-O manual Code selection, On Spirit GT+, press the Monitor button

Figure 16.

UseChangingProgrammingthe ScrollthebuttonChannel:to selectSpiritchannelGT+1 orOnly2.

1.Frequency selectionSpiritGT+radioisatwostepprocess:

2.Code selection

Note: The radio will return to operation mode in 10 seconds or after pressing Push-To-Talk button.

1SelectedChannel:. Press and hold downFrequencytoathe Push-To-Talk

button while turning the on, wait for approximately 5 seconds then release the Push-To-Talk button.

2.Use Scroll button to select one of the 8 frequencies. Figure 16.

3. On Spirit GT+, press the Monitor button.

4. The current channel will flash, press scroll button to change channel.

5.After the second channel is selected, press Monitor button again, current frequency for second channel will flash. Figure 16.

6.Use Scroll button to select new frequency.

1Exit. Press Push-To-Talk Modto exit completely-3Ways.

2.Allow the Menu time to expire (10 seconds).

3.Press Menu button to go to code programming.

Spirit GT+ users can set different frequency for each channel.