Motorola A1200
WAP, MMS and IMAP4 Email Service Setup Guide
All Motorola A1200 purchased from CSL outlets are already programmed with the standard setting of @1010 or One2Free Zone. Should you wish to make a new setting or lose your original one in any circumstances, please follow the procedures below. This service allows you to access in Hong Kong or overseas. When you access the service from overseas, roaming charges will be incurred.
(I)Setup for Standard Local and Overseas WAP services
1.Tap “ 
” enter main menu and according to the following st ep to select “ Setup” “ Data Network” Select profile to be edited “ 
” “ Edit” input the following parameters in table.
| Services | GPRS / CSD (local) |
| CSD (Overseas) only |
Profile name |
| CSL |
| CSL CSD Overseas |
GPRS setting | APN | hkcsl |
| Leave it blank |
| User name | Leave it blank | ||
| Password | Leave it blank | ||
| Timeout | 15 min |
| Off |
| Primary gateway IP |
| 192.168.59.51 | |
| Port |
| 8080 | |
| Secondary gateway IP | Leave it blank | ||
| Port |
| 0 | |
DNS server |
|
| ||
| (1) | Leave it blank | ||
| (2) | Leave it blank | ||
CSD Setting | Dial in number | 179111 |
| +852179112 |
| Query at Logon |
| ||
| User name | Leave it blank | ||
| Password | Leave it blank | ||
| Baud rate |
| 9600 | |
| Line type | ISDN |
| Modem |
| Timeout |
| 5 min | |
DNS server |
|
| ||
| (1) | Leave it blank | ||
| (2) | Leave it blank | ||
2. | When completed, tap “ Save” then “ | ” back to main menu. . |
|
|
| |||||
3. | Tap “ | ” | “ Browser” icon “ | ” “ Setup” “ Profiles” | select any one of the profiles | |||||
|
| “ | ” “ Edit” input the following parameters in table. |
|
|
| ||||
| Profile name | (1010 customer) |
| @1010 |
| 1010 Overseas CSD |
| |||
|
|
|
| (One2Free customer) |
| One2Free Zone |
| O2F Overseas CSD |
| |
| Homepage: | (1010 customer) |
| http://wap.hkcsl.com/1010/ |
| |||||
|
|
|
| (One2Free customer) |
| http://wap.hkcsl.com/o2f/ |
| |||
| Network link |
|
|
| CSL |
| CSL CSD Overseas |
| ||
4. | When complete, tap “ Save” | “ | ” select the profile as default (e.g.: @1010 or One2Free | |||||||
|
| Zone) “ Save” tap “ | ” to quit. |
|
|
|
| |||
Note: For switching the data connection from CSD to GPRS in WAP browsing, the user requires to exit the WAP browser and
