Motorola BHA-100A/P-R, BHA-100K/P-R, BHA-100S/P-R Configuration and Installation, Mounting the BHA-100, Configuring the BHA-100

Section 3

Configuration and Installation

This section provides information to configure and install the BHA-100*, including instructions to:

„

„

„

„

„

Mount the BHA-100*

Configure the BHA-100* (add accessories) Connect and supply power to the BHA-100* Adjust the output level and slope

Install the return amplifier kit

Mounting the BHA-100*

The BHA-100* should be mounted on a flat surface and be positioned vertically. This position results in maximum air flow and the lowest operating temperature. When mounting the BHA-100*, choose a location protected from the weather, with available power in close proximity. The BHA-100* should be mounted flush with the wall using appropriate mounting hardware (not provided with the unit).

Configuring the BHA-100*

To put the BHA-100* into service, the following areas require attention:

„

„

„

Power connections

Cable equalizer and input pad selection and installation Return amplifier installation

BHA-100* Broadband House Amplifier Installation Manual