3-8

Configuration and Installation

4Carefully install the return hybrid gain block in the location shown in Figure 3-2. The pins of the hybrid gain block are fragile and bend when forced.

5Fasten the component with the hardware provided to complete the hybrid gain block installation.

6Install the SRE-* return equalizer in the location shown in Figure 3-2.

7Install JXP-*B zero attenuation pads in the appropriate locations.

Return amplifier gain, output, and slope are controlled by discrete components. Variable controls are not provided. Return output level is adjusted by installing fixed pads, model JXP-*B to meet system requirements. You can control the input level by installing JXP-*B pads. JXP-*B pads are available in values from 1 through 24 dB.

BHA-100* Broadband House Amplifier Installation Manual