3
Installing/Replacing the Battery
➊Turn the pager off. Refer to “Turning Your Pager Off” on page 6.
➋Locate the battery door on the back of the pager.
➌Slide the battery door in the direction of the arrow to unlatch the
battery door.
➍Lift the battery door up to open.
➎Remove the old battery, noting the polarity.
➏Position the new battery so the + and - markings on the battery match
the polarity diagram next to the battery compartment.
➐Close the battery door.
➑Slide the door until it is fully closed.
Note:
Check your pager’s clock time after replacing the battery.
GETTING STARTED
4

Control Buttons

tMenu Used to enter pager setting menus and to turn on the
backlight.
rRead Used to turn the pager on, read messages, and
navigate through menus.
sSelect Used to select pager settings and features. Also used
to read additional screens of messages.
Read
Button
Select
Button
Menu
Button
GETTING STARTED
5

Turning Your Pager On

➊Press r. The start-up screens are
displayed and your pager activates the
power on chime (when in audible mode).
➋Press any button to stop the alert.
The unread message screen is
displayed.
When your pager is on and no activity
is taking place, the Standby screen is
displayed. The Standby screen
displays the time and date and may
display other status indicators.
m 88 f hjl b e
MOTOROLA
m 88 f hjl b e
NEW! 1
m 88 f hjl b e
3!30P 07/05
GETTING STARTED
6

Turning Your Pager Off

➊From the Standby screen, press t twice.
➋Press and release r until PAGER OFF is
displayed, then press s.
OFF is displayed momentarily before
the pager shuts off, and m is removed
from the display.
The off screen displays the time and
date, and if an alarm is set, the alarm
indicator.
m 85 f hjl b e
PAGER OFF
m 85 f ojl b e
OFF
m 88 f ojl b e
3!30P 07/05
GETTING STARTED