19

Messages

Your pager can receive up to 60 messages. When a message is receiv ed,
your pager alerts according to the current alert and m flashes.
Reading New Messages

SET is displayed momentarily.
➊Press r to stop the alert and display
the number of new messages.
➋Press r again to display the first
unread message. When e is present, it
indicates that the message continues on
an additional screen.
m 86 f hjl b e
SET
m 81 f hjl b e
NEW! 1
m 81 f hjl b e
555-1212
MESSAGES
20
➌Press s to display the next screen of your
message.
The next screen of your message,
typically the time stamp, is displayed.
➍Repeat Steps 2 and 3 to read the next
message.
END is displayed after the very last
message is displayed.
Note:
To exit from any screen while
reading your messages, press t,
GO)HOME is displayed, then press s. The
number of unread (new) messages is
displayed before the pager returns to
the Standby mode.
m 81 f hjl b e
3!30P 07/05
m 81 f hjl b e
END
MESSAGES
21
Reading Stored Messages
➊From the Standby screen, press r
twice. The first screen of the first stored
message is displayed.
Note:
If no messages are stored, NO
MESSAGES is displayed.
➋Press s to display the second screen of
your message. If you want to view the first
screen again, press s again.
➌Press r to display the next stored
message. If you want to display just the
first screen of your messages, continue
to press and release r.
m 81 f hjl b e
555-1212
m 81 f hjl b e
3!30P 07/05
m 82 f hjl b e
555-1234
MESSAGES
22

Saving Messages

You can save important messages by moving them to the Message Folder.
For information about moving, reading, and deleting messages in the
folder, refer to “Message Folder” on page 25.
After you have viewed all stored
messages, END is displayed.
Note:
To exit from any screen while
reading your messages, press t,
GO)HOME is displayed, then press s. The
number of unread messages is
displayed before the pager returns to
the Standby mode.
m 82 f hjl b e
END
MESSAGES