11

To Turn Private Time On

You can set a time period during which your pager still receives
messages but it will not alert. Y our pager goes into the Private Time
mode daily until it is turned off.
➊From the Standby screen, press t twice.
➋Press and release r until SET UP
PAGER is displayed.
➌Press s, then press r.
PRIVATE TIME is displayed.
➍Press s.
PRIVATE OFF or PRIVATE ON is displayed
depending on the current setting.
➎Press and release r until PRIVATE ON
is displayed, then press s.
m 86 f hjl b e
SET UP PAGER
m 82 f hjl b e
PRIVATE TIME
m 82 f hjl b e
PRIVATE OFF
m 82 f ujl b e
PRIVATE ON
PRIVATE TIME
12
The screen used to set the start time is
displayed.
➏Press and release r until the desired
start hour is displayed, then press s.
➐Repeat Step 6 to set the minutes and
AM/PM fields (if your pager’s clock is set
to AM/PM time).
m 82 f ujl b e
START! 03!00A
m 82 f ujl b e
START! 03!30P
PRIVATE TIME
13
The screen used to set the stop (END)
time is displayed.
➑To set the stop time, follow the same
procedure used to set the start time.
When finished, SET is displayed
momentarily.
Note:
When your pager has entered
the private time mode, q replaces the
alert mode indicator.
m 82 f ujl b e
END! 05!00P
m 82 f ujl b e
SET
PRIVATE TIME
14

To Turn Private Time Off

➊Follow steps 1 through 4 in “To Turn
Private Time On” on page 11.
➋Press and release r until PRIVATE! OFF
is displayed, then press s.
The START screen is displayed
momentarily.
m 82 f hjl b e
PRIVATE OFF
PRIVATE TIME