7

Sending a Test Page to Yourself

After you have read this guide and your pager has been activated
by your service provider, send yourself a test page. Refer to
“Functionality and Use of Your P ager” on page 40.

Backlight

In low-light conditions, press and hold t for 2 seconds to turn on the
pager’s backlight. The backlight turns off automatically after the pager
returns to the Standby screen.

Setting up Your Pager

This section gives instructions for setting the time and date, Private Time,
and alert volume. Access to these features is obtained through the Setup
Pager menu.
GETTING STARTED
8
Setting the Time and Date
➊From the Standby screen, press t twice.
➋Press and release r until SET UP
PAGER is displayed.
➌Press s.
TIME/DATE is displayed.
➍Press s.
FORMAT!AM/PM or FORMAT!24HR is
displayed.
m 86 f hjl b e
SET UP PAGER
m 81 f hjl b e
TIME/DATE
m 85 f hjl b e
FORMAT! AM/PM
TIME AND DATE
9
➎Press and release r until your choice
of FORMAT!AM/PM (for AM/PM time), or
FORMAT!24HR (for 24-hour time) is
displayed, then press s.
The screen used to set the time is
displayed with the hour digit flashing.
➏Press r until the correct hour is
displayed, then press s.
➐Repeat Step 6 to set the minutes and AM/
PM fields (if AM/PM time was selected
above).
m 85 f hjl b e
TIME! 12!00A
m 85 f hjl b e
TIME! 03!00A
m 85 f hjl b e
TIME! 03!30P
TIME AND DATE
10
After the time has been set, the screen
used to set the date is displayed.
➑Press and release r until the correct
month is displayed, then press s.
➒Press and release r until the correct
day is displayed, the press s.
SET is displayed momentarily.
m 85 f hjl b e
DATE! 07/01
m 85 f hjl b e
DATE! 07/05
m 85 f hjl b e
SET
TIME AND DATE