C300CompleteVersion.fm Page 22 Friday, April 19, 2002 2:16 PM
Tips on using Smart Input (iTAP)
To enter words:
•Type a word by pressing a corresponding alphanumeric key only once for each letter, without having to consider the order of the alphabets indicated on the keys. The word you type will appear outside the text frame before you confirm it OK.
•To switch between upper case and lower case, press 0 
. Press
(DELETE) once to delete a wrong letter; long press 
to delete an entire word.
•The word changes as you type
•If the word displayed is not the one you want after typing it
completely, press 
for the next word candidate. You can also
press 
for the next/previous candidate. When the desired one
appears, press 
(OK) or 
to put it inside the text frame, then a space will appear automatically between the word and the cursor. So you can type the next work directly without having to leave a space for it.
•After you enter a word in the text area, you can press 
once to move the cursor to the insertion point of the next/last character; long press to move the cursor continuously.
•In the text area, press 
(DELETE) once to clear one character;
long press 
to clear all text.
224. Input Mode Menu
