RADIO CALLS
SELECTIVE RADIO INHIBIT
Your radio is equipped with a security feature that can temporarily render the unit inoperative when an inhibit signal is sent from the base station.
This feature is commonly used to disable radios:
•In case of theft
•When your vehicle is being serviced
•For system control reasons
When your radio has been rendered inoperative by the base station, all controls will be inoperative except for the On/Off/Volume knob and the display shows INHIBIT.
RECEIVE A SELECTIVE CALL F
When you receive a Selective Call:
•The display shows F and the prepro- grammed name or ID of the calling radio.
•The yellow LED indicator flashes, if pro- grammed by your dealer/programmer.
•You hear two
1To acknowledge the call, press and release the PTT button.
2Press and hold the PTT button to talk; release to listen.
SEND A SELECTIVE CALL
You can send a Selective Call to a particular radio or to a group of radios, as programmed by your dealer/programmer.
Press the preprogrammed Radio Call button (see page 14), and proceed to step 4.
– or –
1Dto enter menu mode
23
RADIO CALLS
English
