6 TROUBLESHOOTING

Problem

Possible Solutions

The remote

• Verify that the remote control is in “Cable”

control does not

mode.

work.

• Verify that there are no obstructions

 

 

between the remote control and the DCH

 

receiver. Aim the remote control directly at

 

the DCH receiver front panel, not the TV or

 

VCR.

 

• If using an external IR senor connected to

 

the EXT IR input on the rear panel, ensure

 

the cable is properly connected to the rear

 

panel input and that there is a clear line-of-

 

sight from the remote to the sensor.

 

• The angle between the remote control and

 

the DCH receiver may be too large. Stand

 

in front of the DCH receiver and not too far

 

to either side.

 

• Press and release operation keys one at a

 

time, firmly and deliberately.

 

• Check the batteries in the remote control.

 

Install new batteries if needed.

18