7 TROUBLESHOOTING
Problem | Possible Solution |
|
|
There are | This may occur on a 4:3 TV if the 4:3 OVERRIDE |
black bars on | setting is OFF. To set 4:3 SD programming to fill |
all four sides | the screen, depending on the capabilities of the |
of the picture | TV, set 4:3 OVERRIDE to 480i or 480p. |
| This may occur on a 16:9 TV if the active video for |
| an SD broadcast is in letterbox format. To |
| confirm, wait for a commercial or look for a |
| graphic, such as a network logo. If the |
| commercial fills the screen from top to bottom, or |
| the graphic appears below the active video, the |
| program is being letterboxed by the broadcaster. |
| You can minimize this by activating the zoom |
| feature on the TV. |
| A broadcaster may include black bars on either |
| side of a wide screen broadcast. This is called a |
| “hybrid” aspect ratio and results in a black border |
| surrounding the video on a 4:3 TV. Because this is |
| part of the broadcast, the DCX3200 cannot |
| correct the video. You may be able to minimize |
| the border using the zoom feature on the TV. |
|
|
Colors do not | Be sure to match up each signal to the same |
appear | YPbPr connection on the TV, otherwise the colors |
correctly | will not appear correctly on your TV. |
|
|
45