9 - 2 Symbol DS6708 Digital Scanner Product Reference Guide

Connecting Using Wand Emulation
To perform Wand Emulation, connect the digital scanner to a mobile computer, or a controller which collects the
wand data and interprets it for the host.
Figure 9-1
Wand Emulation Connection
Figure 9-2
Wand Emulation Connection for Scanner with Base
1. Attach the modular connector of the Wand Emulation interface cable to cable interfac e port on the digital
scanner (see Installing the Interface Cable on page 1-3).
2. Connect the other end of the Wand Emulation interface cable to the wand port on the mobile compute r or
controller.
Wand Port
Interface Cable
Mobile Computer
Interface Cable
Wand Port
Mobile Computer
NOTE Interface cables vary depending on configuration. The connectors illustrated in Figure 9-1 and Figure
9-2are examples only. The connectors may be di f f e ren t th an those illustrated, but the steps to connect the
scanner are the same.