Symbologies 13 - 51
MSI

Enable/Disable MSI

Parameter # 0Bh

To enable or disable MSI, scan the appropriate bar code below.

Set Lengths for MSI

Parameter # L1 = 1Eh, L2 = 1Fh

The length of a code refers to the number of characters (i.e., human readable c haracters), including check digit(s)
the code contains. Set lengths for MSI to any length, one or two discrete lengths, or lengths withi n a specific range.
One Discrete Length - Select this option to decode only MSI symbols containing a selected lengt h. Select
the length using the numeric bar codes in Appendix D, Numeric Bar Code s. For example, to decode only MSI
symbols with 14 characters, scan MSI - One Discrete Length, then scan 1 followed by 4. To correct an
error or to change the selection, scan Cancel on page D-2.
Two Discrete Lengths - Select this option to decode only MSI symbols containing either of two selected
lengths. Select lengths using the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to
decode only MSI symbols containing either 2 or 14 characters, select MSI - Two Discrete Lengths, then
scan 0, 2, 1, and then 4. To correct an error or to change the selection, scan Cancel on page D-2.
Length Within Range - Select this option to decode a MSI symbol with a specific length range. Select
lengths using numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode MSI
symbols containi ng between 4 and 12 characters, first scan M SI - Length Within Range. Then scan 0, 4,
1, and 2 (enter a leading zero for single digit numbers). To correct an error or change the selection, scan
Cancel on page D-2.
Any Length - Scan this option to decode MSI symbols containing any number of charact ers within the digital
scanner’s capability.
Enable MSI
(01h)
*Disable MSI
(00h)