Motorola DS6708 Decoding Preferences Parameter Defaults

5 - 2 Symbol DS6708 Digital Scanner Product Reference Guide
Scanning Sequence Examples
In most cases scanning one bar code sets the parameter value. For example, to disab le the decode aiming pattern,
scan the Disable Decode Aiming Pattern bar code listed under Decode Aiming Pattern on page 5-5. The digital
scanner issues a fast warble beep and the LED turns green, signifying a su ccessful parameter entry.
Other parameters require scanning several bar codes. See these parameter descripti ons for this procedure.
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning seque nce, just re-scan the correct parameter.
Decoding Preferences Parameter Defaults
Table 5-1 lists the defaults for decoding preferences parameters. There are two ways to change the default values:
• Scan the appropriate bar codes in this guide. These new values replace the s tandard default values in
memory. To recall the default parameter values, scan the Set Default Parameter on page 4-4.
• Configure the digital scanner using the 123Scan configuration program (see Ch apter 12, 123Scan).
NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 5-1 Decoding Preferences Parameter Defaults
Parameter Parameter
Number Default Page Number
Decoding Options
Decoding Illumination F0h 2Ah Enable 5-3
Illumination Bank Control F1h 3Bh Full Illumination 5-4
Decode Aiming Pattern F0h 32h Enable 5-5
Low Light Enhancement F1h 64h Disable 5-5
Presentation Mode Field of View F1h 61h Default (Reduced) 5-6