SCAN
You can monitor multiple channels and receive any calls that are transmitted on them. Channels can be programmed into a scan list by your dealer. Your radio automatically switches to a scan list channel when it detects activity on it.
STARTING OR STOPPING SCAN
The green LED indicator blinks during a scan operation and stops blinking when the radio switches to a channel.
You can start or stop a scan operation by:
1To start or stop a scan operation, press the preprogrammed Scan button (see page 13).
2Select a channel that has been preprogrammed by your dealer to start Auto Scan.
Note: You do not need to press a prepro- grammed Scan button.
3Select a channel that has not been preprogrammed by your dealer to stop Auto Scan.
TALKBACK
The Talkback feature allows you to respond to a transmission while scanning. If transmission is detected on a channel while scanning, the radio will stop on that channel for a preprogrammed period of time. During this “hangtime” you may respond by pressing the PTT button.
Notes: If transmission ceases or if the PTT button is not pressed for a prepro- grammed duration, the radio continues to scan. The LED scan indicator stops blinking while the radio is in hangtime.
23
SCAN
English
