Motorola Express Pager manual 1128a

Turning Your Pager On and Off		Setting the Clock and Date
Press [ to turn your pager on. An alert indicator on the		Setting the Clock:
upper left-hand corner indicates the pager is on and ready		➊ Press and release \ until set time ? is displayed.
to receive messages.
		➋ Press [. The hour digits begin to flash.
When the pager is on and no activity is taking place, the stand-
		➌ Press and release \ to set the correct hour digits.
by screen is displayed.
		E
	E
	11:28a 11-03		11:28a
			Example of a set-time screen
Example of a standby screen (pager on)
➊ To turn your pager off, press and release \ until		➍ Press [. The first digit of the minutes begins to flash.
pager off ? is displayed.		➎ Press and release \ to set the correct minutes.
➋ Press [.		➏ Press [ again to move to the next minutes digit.
The time of day and the date are displayed on your pager		➐ Press [. The A.M./P.M. indicator begins to flash.
even when it is off.		➑ Repeat steps 5 and 6 to set your pager for A.M./P.M.
		and the 12/24 hour mode.
		➒ Press ] twice or allow the pager to automatically return
	11:28a 11-03	to the standby screen. The time and date are displayed.
		Note: When adjusting any of the time and date fields, press
Example of a standby screen (pager off)		and hold the \ to fast-forward to your selection. To skip a
		field, press and release[ until you reach the desired field.
Turning the Light On and Off		For example, if you only need to change the 12 Hour setting,
		press and release \ until set time ? is displayed, then
		press and release [ until 12 hours begins to flash.
➊ Press ] at any time to turn the light on.
		After performing any pager functions described in this
➋ Press ] again while the clock or a message is dis-		manual, your ULTRA Express pager automatically returns
played to turn the light off and return to the standby		to the standby mode and your selections are activated; or
screen.		press ] twice to return to the standby mode and activate
		your selections.
3		4
Setting the Date:		Receiving and Reading Messages
➊ Press and release \ until set date ? is displayed.
		When a message is received, the pager alerts for 8 sec-
➋ Press [. The month digits begin to flash.
		onds.
➌ Press \ to set the correct month digits.
		➊ Press any button to stop the alert.
➍ Press [. The day digits begin to flash.
		➋ Press [ to display the message.
➎ Press \ to set the correct day digits.
		➌ Press ] twice while the message is displayed to re-
➏ Press ] twice or allow the pager to automatically return
		turn to the standby screen.
to the standby screen. The time and date are displayed.
Setting the Incoming Message Alert
			E	I
			555-1234
You can set your pager to alert with either a pleasing (au-
dible) alert or a vibrating (silent) alert.
➊ Press \ until silent ? or audio ? is displayed		Example of a screen with message continuation indicator
depending on which mode the pager is in currently. For
the pager to vibrate, it must be in the silent mode.		Messages containing more than 12 characters are dis-
➋ To change the alert mode, press [ while your choice		played on a second screen. The I symbol indicates there
		are additional screens. The second screen is displayed
of alert mode is displayed.
		automatically after 1 minute, or pressing [ advances the
The choices are E for audible or D for vibrate (silent).
		display to the second screen. The last screen of the mes-
Setting the Pleasing Alerts		sage displays the message number and time the mes-
		sage was received.
You can set your ULTRA Express pager to alert with one		If a message is left unread, the pager emits a reminder
of four pleasing alerts or one standard alert.		alert every 2 minutes, and the number of unread messag-
Note: You must first set the incoming alert mode to “Audi-		es is displayed on the screen (i.e., 1 Page, 2 Pages).
ble”, see above.		Protecting and Unprotecting Your Messages
➊ Press and release \ until set alert ? is dis-
played.		You can protect up to eight messages so they are not
➋ Press [. The current setting is displayed.		erased or replaced by new messages. The message you
➌ Press and release \ until your choice of ALERT 1,		want to protect/unprotect must be displayed on the
		screen.
ALERT 2, ALERT 3, ALERT 4 or ALERT 5 is displayed.
		➊ To protect a message, press and release ▲ while the
➍ Press ] twice or allow the pager to automatically re-
		message is displayed until protect ? is displayed.
turn to the standby screen.
		➋ Press [.
		When reading a protected message, the protect F symbol
		is displayed in the upper portion of the screen.
5		6