For an inactive device (not shown in the active devices list) when there is no free slot in the active devices list (already two active devices):
5.Press MENU (Base) and then 
or 
to select
REPLACE or REMOVE.
If you select REPLACE:
6.Press MENU (Base) and then 
or 
to select a device on the active list to be replaced.
7.Press MENU (Base) and display will show DEVICE ADDED, and then the telephone will start to connect the selected cellular device.
If you select REMOVE:
Follow the steps above.
NOTES
•When the connected cellular is removed, the corresponding 
or 
will be off.
•When the disconnected cellular is connected, the corresponding 
or 
will be on.
•When the cellular is removed, the device name will be removed and EMPTY will be displayed instead in the paired devices list.
3.3.2Replacing a paired device
If you have already paired up four Bluetooth enabled mobile devices, you will need to replace one of them if you would like to pair up another device. Follow the steps below to replace and pair up a new device.
1.Press MENU (Base) and then 
or 
to select
BLUETOOTH.
2.Press MENU (Base) and then 
or 
to select
SETUP CELL.
3.Display will show 4 CELLS MAX., and then REPLACE?.
4.Press MENU (Base) to confirm. Display will show the four Cellular names of the paired devices.
5.Press 
or 
to select the cellular device you would like to replace.
6.Press MENU (Base) to confirm. Display will show
REMOVED, and then CELLULAR READY?.
7.Refer to section 3.2 to proceed with the next steps.
NOTE
When pairing up a new cellular, the connected cellular will be disabled temporarily.
BLUETOOTH® | 23 |
|
|
