Motorola L702CBT manual Registration, Registering a cordless handset

6.22Setting the flash time

The default flash time is suitable for your country and network operator. It is unlikely that you should need to change this setting unless advised to do so.

1.Press MENU and then VOL+ or REDIAL/VOL- to select SETUP BS.

2.Press MENU and then VOL+ or REDIAL/VOL- to

select FLASH TIME.

3.Press MENU and then VOL+ or REDIAL/VOL- to the flash time you want. (8 options are available: 90,

100, 110, 250, 300, 400, 600 and 700MS)

4.Press MENU to save the setting.

6.23Setting the area code

1.Press MENU and then VOL+ or REDIAL/VOL- to select SETUP BS.

2.Press MENU and then VOL+ or REDIAL/VOL- to

select AREA CODE.

3.Press MENU and enter the area code.

4.Press MENU to save the setting.

54

6.24Registration

6.24.1Registering a cordless handset

Up to 5 cordless handsets can be registered to a corded base. The original cordless handset is pre-registered to use. Additional cordless handsets must be registered to the corded base before you can use them.

To register an additional cordless handset,

1.Press MENU and then VOL+ or REDIAL/VOL- to select SETUP HS.

2.Press MENU and then VOL+ or REDIAL/VOL- to

select REGISTRATION.

3.Press MENU and then VOL+ or REDIAL/VOL- to select YES or NO.

4.Select YES and then press MENU to enter the registration procedure as follows:

1)Press and hold #/ /PAUSE/FORMAT/FIND for around 4 seconds on the corded base.

2)Place the unregistered cordless handset on the charger.

3)A confirmation tone is generated if registration is successful. HANDSET X is displayed where X denotes the number of handsets, and then the

phone returns to idle.

To register an originally unregistered cordless handset, follow steps 1) through 3) above.

USING THE PHONE