4.20.3 Three-party conference call
1.During an external home call, press MENU (Base). Your call will be put on hold.
2.Press 
or 
to select the cordless handset you want to call.
3.Press MENU (Base) to call the cordless handset.
4.When the cordless handset answers the intercom call, press MENU (Base) on the corded base to join the conference call.
5.Press 
/HOME on the corded base or put the corded handset on the base cradle to end a three-
party conference call and leave the cordless handset engaged with the caller.
NOTE
During an external home call on the base, pressing 
/HOME or 
/SPEAKER on any other cordless
handset will join the call and set up a conference call.
4.21Setting the dial mode
The default dialing mode is suitable for your country and network operator. It is unlikely that you should need to change this setting unless advised to do so.
1.Press MENU (Base) and then 
or 
to select
SETTINGS.
2.Press MENU (Base) and then 
or 
to select
DIAL MODE.
3.Press MENU (Base) and 
or 
to select TONE
or PULSE.
4.Press MENU (Base) to save the setting.
NOTE
If pulse mode is selected, press */TONE to switch from pulse to tone dialing temporarily when dialing out. After the call is ended, the dial mode will change back to pulse automatically.
4.22Setting the flash time
The default flash time is suitable for your country and network operator. It is unlikely that you should need to change this setting unless advised to do so.
1.Press MENU (Base) and then 
or 
to select
SETTINGS.
2.Press MENU (Base) and then 
or 
to select
FLASH TIME.
3.Press MENU (Base) and then 
or 
to the flash time you want. (8 options are available: 90MS,
100MS, 110MS, 250MS, 300MS, 400MS, 600MS, and 700MS)
4.Press MENU (Base) to save the setting.
34 | USING YOUR PHONE |
|
|
