English |
EMC declaration
This product is developed in accordance with the European standards EN 55014 and EN
To guarantee the electromagnetic tolerance you must take the following precautions:
§Connect the transformer only to an approved mains socket installed by an authorised electrician.
§Make no changes to the original parts and accurately follow the instructions, circuit diagram and PCB layout included with this manual.
§Use only original spare parts if you have to repair the kit or the
Information: Motorola I and Motorola II format
The digital driving data is differently encoded and transmitted in the (old) Motorola I format and the (new) Motorola II format. The locomotive decoder is designed to evaluate data in Motorola II format. This limits its use in Motorola I format.
Since data of the auxiliary functions F1 to F4 sent in Motorola I Format cannot be evaluated by the locomotive decoder, it is not possible to switch these functions on or off when using Motorola I format.
Unlike the Motorola II format, no absolute direction data is sent in Motorola I format, but a single driving signal reverses the direction of travel. This has the following consequences:
1.If the change direction command is not recognized by the locomotive, it continues in the original direction.
2.If the decoder is switched off for some time and the direction data is not saved, the locomotive continues in its favourite direction when it is switched on again.
Page 24
